Ticket Expiration Policies
CAS supports a pluggable and extensible policy framework to control the expiration policy of ticket-granting
tickets (TGT
), proxy-granting tickets (PGT
), service tickets (ST
), proxy tickets (PT
), etc.
There are many other types of artifacts in CAS that take the base form of a ticket abstraction. Each protocol or feature may introduce a new ticket type that carries its own expiration policy and you will need to consult the documentation for that feature or behavior to realize how expiration policies for a specific ticket type may be tuned and controlled.
Actuator Endpoints
The following endpoints are provided by CAS:
Ticket-Granting Ticket Policies
TGT
expiration policy governs the time span during which an authenticated user may grant ST
s with a valid (non-expired) TGT
without
having to re-authenticate. An attempt to grant an ST with an expired TGT
would require the user to re-authenticate
to obtain a new (valid) TGT
.
Default
This is the default option, which provides a hard-time out as well as a sliding window.
The following settings and properties are available from the CAS configuration catalog:
cas.ticket.tgt.core.max-length=50
Maximum length of tickets.
|
cas.ticket.tgt.core.only-track-most-recent-session=true
Flag to control whether to track most recent SSO sessions. As multiple tickets may be issued for the same application, this impacts how session information is tracked for every ticket which then has a subsequent impact on logout.
|
cas.ticket.tgt.primary.max-time-to-live-in-seconds=PT8H
Maximum time in seconds tickets would be live in CAS server. This settings supports the
|
cas.ticket.tgt.primary.time-to-kill-in-seconds=PT2H
Time in seconds after which tickets would be destroyed after a period of inactivity. This settings supports the
|
Configuration Metadata
The collection of configuration properties listed in this section are automatically generated from the CAS source and components that contain the actual field definitions, types, descriptions, modules, etc. This metadata may not always be 100% accurate, or could be lacking details and sufficient explanations.
Be Selective
This section is meant as a guide only. Do NOT copy/paste the entire collection of settings into your CAS configuration; rather pick only the properties that you need. Do NOT enable settings unless you are certain of their purpose and do NOT copy settings into your configuration only to keep them as reference. All these ideas lead to upgrade headaches, maintenance nightmares and premature aging.
YAGNI
Note that for nearly ALL use cases, declaring and configuring properties listed here is sufficient. You should NOT have to explicitly massage a CAS XML/Java/etc configuration file to design an authentication handler, create attribute release policies, etc. CAS at runtime will auto-configure all required changes for you. If you are unsure about the meaning of a given CAS setting, do NOT turn it on without hesitation. Review the codebase or better yet, ask questions to clarify the intended behavior.
Naming Convention
Property names can be specified in very relaxed terms. For instance cas.someProperty
, cas.some-property
, cas.some_property
are all valid names. While all
forms are accepted by CAS, there are certain components (in CAS and other frameworks used) whose activation at runtime is conditional on a property value, where
this property is required to have been specified in CAS configuration using kebab case. This is both true for properties that are owned by CAS as well as those
that might be presented to the system via an external library or framework such as Spring Boot, etc.
When possible, properties should be stored in lower-case kebab format, such as cas.property-name=value
.
The only possible exception to this rule is when naming actuator endpoints; The name of the
actuator endpoints (i.e. ssoSessions
) MUST remain in camelCase mode.
Settings and properties that are controlled by the CAS platform directly always begin with the prefix cas
. All other settings are controlled and provided
to CAS via other underlying frameworks and may have their own schemas and syntax. BE CAREFUL with
the distinction. Unrecognized properties are rejected by CAS and/or frameworks upon which CAS depends. This means if you somehow misspell a property definition
or fail to adhere to the dot-notation syntax and such, your setting is entirely refused by CAS and likely the feature it controls will never be activated in the
way you intend.
Validation
Configuration properties are automatically validated on CAS startup to report issues with configuration binding, specially if defined CAS settings cannot be
recognized or validated by the configuration schema. The validation process is on by default and can be skipped on startup using a special system
property SKIP_CONFIG_VALIDATION
that should be set to true
. Additional validation processes are also handled
via Configuration Metadata and property migrations applied automatically on
startup by Spring Boot and family.
Indexed Settings
CAS settings able to accept multiple values are typically documented with an index, such as cas.some.setting[0]=value
. The index [0]
is meant to be
incremented by the adopter to allow for distinct multiple configuration blocks.
Ticket expiration policies are activated in the following conditions:
- If the timeout values for the default policy are all set to zero or less, CAS shall ensure tickets are never considered expired.
- Disabling a policy requires that all its timeout settings be set to a value equal or less than zero.
- If not ticket expiration policy is determined, CAS shall ensure the ticket are always considered expired.
You are encouraged to only keep and maintain properties and settings needed for a particular policy. It is UNNECESSARY to grab a copy of all fields or keeping a copy as a reference while leaving them commented out. This strategy would ultimately lead to poor upgrades increasing chances of breaking changes and a messy deployment at that.
Ticket expiration policies are activated in the following order:
- Tickets are never expired, if and when settings for the default policy are configured accordingly.
- Timeout
- Default
- Throttled Timeout
- Hard Timeout
- Tickets always expire immediately.
Per Service
The expiration policy of ticket granting tickets can be conditionally decided on a per-application basis. The candidate service whose ticket granting ticket expiration policy is to deviate from the default configuration must be designed as such:
1
2
3
4
5
6
7
8
9
10
{
"@class" : "org.apereo.cas.services.CasRegisteredService",
"serviceId" : "^https://.*",
"name" : "Sample",
"id" : 10,
"ticketGrantingTicketExpirationPolicy": {
"@class": "org.apereo.cas.services.DefaultRegisteredServiceTicketGrantingTicketExpirationPolicy",
"maxTimeToLiveInSeconds": 5
}
}
Remember that applications are responsible to manage their own session. CAS will not and cannot manage the application session and generally has no control over the application’s timeout policies, logout practices, etc. The expiration policy of the ticket-granting ticket per application allows to CAS to use that policy as an override and separate from the global defaults, at the time the ticket is constructed and only if the incoming service request matches that given registered service definition. Once created, the policy remains global and affects all other applications and it has nothing to do with how the application manages its own sessions.
Timeout
The expiration policy applied to TGTs provides for most-recently-used expiration policy, similar to a Web server session timeout.
For example, a 2-hour time span with this policy in effect would require a TGT
to be used every 2 hours or less, otherwise
it would be marked as expired.
The following settings and properties are available from the CAS configuration catalog:
cas.ticket.tgt.timeout.max-time-to-live-in-seconds=
Maximum time in seconds. for TGTs to be live in CAS server. This settings supports the
|
Configuration Metadata
The collection of configuration properties listed in this section are automatically generated from the CAS source and components that contain the actual field definitions, types, descriptions, modules, etc. This metadata may not always be 100% accurate, or could be lacking details and sufficient explanations.
Be Selective
This section is meant as a guide only. Do NOT copy/paste the entire collection of settings into your CAS configuration; rather pick only the properties that you need. Do NOT enable settings unless you are certain of their purpose and do NOT copy settings into your configuration only to keep them as reference. All these ideas lead to upgrade headaches, maintenance nightmares and premature aging.
YAGNI
Note that for nearly ALL use cases, declaring and configuring properties listed here is sufficient. You should NOT have to explicitly massage a CAS XML/Java/etc configuration file to design an authentication handler, create attribute release policies, etc. CAS at runtime will auto-configure all required changes for you. If you are unsure about the meaning of a given CAS setting, do NOT turn it on without hesitation. Review the codebase or better yet, ask questions to clarify the intended behavior.
Naming Convention
Property names can be specified in very relaxed terms. For instance cas.someProperty
, cas.some-property
, cas.some_property
are all valid names. While all
forms are accepted by CAS, there are certain components (in CAS and other frameworks used) whose activation at runtime is conditional on a property value, where
this property is required to have been specified in CAS configuration using kebab case. This is both true for properties that are owned by CAS as well as those
that might be presented to the system via an external library or framework such as Spring Boot, etc.
When possible, properties should be stored in lower-case kebab format, such as cas.property-name=value
.
The only possible exception to this rule is when naming actuator endpoints; The name of the
actuator endpoints (i.e. ssoSessions
) MUST remain in camelCase mode.
Settings and properties that are controlled by the CAS platform directly always begin with the prefix cas
. All other settings are controlled and provided
to CAS via other underlying frameworks and may have their own schemas and syntax. BE CAREFUL with
the distinction. Unrecognized properties are rejected by CAS and/or frameworks upon which CAS depends. This means if you somehow misspell a property definition
or fail to adhere to the dot-notation syntax and such, your setting is entirely refused by CAS and likely the feature it controls will never be activated in the
way you intend.
Validation
Configuration properties are automatically validated on CAS startup to report issues with configuration binding, specially if defined CAS settings cannot be
recognized or validated by the configuration schema. The validation process is on by default and can be skipped on startup using a special system
property SKIP_CONFIG_VALIDATION
that should be set to true
. Additional validation processes are also handled
via Configuration Metadata and property migrations applied automatically on
startup by Spring Boot and family.
Indexed Settings
CAS settings able to accept multiple values are typically documented with an index, such as cas.some.setting[0]=value
. The index [0]
is meant to be
incremented by the adopter to allow for distinct multiple configuration blocks.
Hard Timeout
The hard timeout policy provides for finite ticket lifetime as measured from the time of creation. For example, a 4-hour time span for this policy means that a ticket created at 1PM may be used up until 5PM; subsequent attempts to use it will mark it expired and the user will be forced to re-authenticate.
The following settings and properties are available from the CAS configuration catalog:
cas.ticket.tgt.hard-timeout.time-to-kill-in-seconds=
Timeout in seconds to kill the session and consider tickets expired. This settings supports the
|
Configuration Metadata
The collection of configuration properties listed in this section are automatically generated from the CAS source and components that contain the actual field definitions, types, descriptions, modules, etc. This metadata may not always be 100% accurate, or could be lacking details and sufficient explanations.
Be Selective
This section is meant as a guide only. Do NOT copy/paste the entire collection of settings into your CAS configuration; rather pick only the properties that you need. Do NOT enable settings unless you are certain of their purpose and do NOT copy settings into your configuration only to keep them as reference. All these ideas lead to upgrade headaches, maintenance nightmares and premature aging.
YAGNI
Note that for nearly ALL use cases, declaring and configuring properties listed here is sufficient. You should NOT have to explicitly massage a CAS XML/Java/etc configuration file to design an authentication handler, create attribute release policies, etc. CAS at runtime will auto-configure all required changes for you. If you are unsure about the meaning of a given CAS setting, do NOT turn it on without hesitation. Review the codebase or better yet, ask questions to clarify the intended behavior.
Naming Convention
Property names can be specified in very relaxed terms. For instance cas.someProperty
, cas.some-property
, cas.some_property
are all valid names. While all
forms are accepted by CAS, there are certain components (in CAS and other frameworks used) whose activation at runtime is conditional on a property value, where
this property is required to have been specified in CAS configuration using kebab case. This is both true for properties that are owned by CAS as well as those
that might be presented to the system via an external library or framework such as Spring Boot, etc.
When possible, properties should be stored in lower-case kebab format, such as cas.property-name=value
.
The only possible exception to this rule is when naming actuator endpoints; The name of the
actuator endpoints (i.e. ssoSessions
) MUST remain in camelCase mode.
Settings and properties that are controlled by the CAS platform directly always begin with the prefix cas
. All other settings are controlled and provided
to CAS via other underlying frameworks and may have their own schemas and syntax. BE CAREFUL with
the distinction. Unrecognized properties are rejected by CAS and/or frameworks upon which CAS depends. This means if you somehow misspell a property definition
or fail to adhere to the dot-notation syntax and such, your setting is entirely refused by CAS and likely the feature it controls will never be activated in the
way you intend.
Validation
Configuration properties are automatically validated on CAS startup to report issues with configuration binding, specially if defined CAS settings cannot be
recognized or validated by the configuration schema. The validation process is on by default and can be skipped on startup using a special system
property SKIP_CONFIG_VALIDATION
that should be set to true
. Additional validation processes are also handled
via Configuration Metadata and property migrations applied automatically on
startup by Spring Boot and family.
Indexed Settings
CAS settings able to accept multiple values are typically documented with an index, such as cas.some.setting[0]=value
. The index [0]
is meant to be
incremented by the adopter to allow for distinct multiple configuration blocks.
Throttled
The throttled timeout policy extends the TimeoutExpirationPolicy with the concept of throttling where a ticket may be used at most every N seconds. This policy was designed to thwart denial of service conditions where a rogue or misconfigured client attempts to consume CAS server resources by requesting high volumes of service tickets in a short time.
The following settings and properties are available from the CAS configuration catalog:
cas.ticket.tgt.throttled-timeout.time-in-between-uses-in-seconds=
Timeout in between each attempt. This settings supports the
|
cas.ticket.tgt.throttled-timeout.time-to-kill-in-seconds=
Timeout in seconds to kill the session and consider tickets expired. This settings supports the
|
Configuration Metadata
The collection of configuration properties listed in this section are automatically generated from the CAS source and components that contain the actual field definitions, types, descriptions, modules, etc. This metadata may not always be 100% accurate, or could be lacking details and sufficient explanations.
Be Selective
This section is meant as a guide only. Do NOT copy/paste the entire collection of settings into your CAS configuration; rather pick only the properties that you need. Do NOT enable settings unless you are certain of their purpose and do NOT copy settings into your configuration only to keep them as reference. All these ideas lead to upgrade headaches, maintenance nightmares and premature aging.
YAGNI
Note that for nearly ALL use cases, declaring and configuring properties listed here is sufficient. You should NOT have to explicitly massage a CAS XML/Java/etc configuration file to design an authentication handler, create attribute release policies, etc. CAS at runtime will auto-configure all required changes for you. If you are unsure about the meaning of a given CAS setting, do NOT turn it on without hesitation. Review the codebase or better yet, ask questions to clarify the intended behavior.
Naming Convention
Property names can be specified in very relaxed terms. For instance cas.someProperty
, cas.some-property
, cas.some_property
are all valid names. While all
forms are accepted by CAS, there are certain components (in CAS and other frameworks used) whose activation at runtime is conditional on a property value, where
this property is required to have been specified in CAS configuration using kebab case. This is both true for properties that are owned by CAS as well as those
that might be presented to the system via an external library or framework such as Spring Boot, etc.
When possible, properties should be stored in lower-case kebab format, such as cas.property-name=value
.
The only possible exception to this rule is when naming actuator endpoints; The name of the
actuator endpoints (i.e. ssoSessions
) MUST remain in camelCase mode.
Settings and properties that are controlled by the CAS platform directly always begin with the prefix cas
. All other settings are controlled and provided
to CAS via other underlying frameworks and may have their own schemas and syntax. BE CAREFUL with
the distinction. Unrecognized properties are rejected by CAS and/or frameworks upon which CAS depends. This means if you somehow misspell a property definition
or fail to adhere to the dot-notation syntax and such, your setting is entirely refused by CAS and likely the feature it controls will never be activated in the
way you intend.
Validation
Configuration properties are automatically validated on CAS startup to report issues with configuration binding, specially if defined CAS settings cannot be
recognized or validated by the configuration schema. The validation process is on by default and can be skipped on startup using a special system
property SKIP_CONFIG_VALIDATION
that should be set to true
. Additional validation processes are also handled
via Configuration Metadata and property migrations applied automatically on
startup by Spring Boot and family.
Indexed Settings
CAS settings able to accept multiple values are typically documented with an index, such as cas.some.setting[0]=value
. The index [0]
is meant to be
incremented by the adopter to allow for distinct multiple configuration blocks.
Never
The never expires policy allows tickets to exist indefinitely.
Use of this policy has significant consequences to overall security policy and should be enabled only after a thorough review by a qualified security team. There are also implications to server resource usage for the ticket registries backed by filesystem storage. Since disk storage for tickets can never be reclaimed for those registries with this policy in effect, use of this policy with those ticket registry implementations is strongly discouraged.
Service Ticket Policies
ST expiration policy governs the time span during which an authenticated user may attempt to validate an ST.
Default
This is the default policy applied to service tickets where a ticket is expired after a fixed number of uses or after a maximum period of inactivity elapses.
The following settings and properties are available from the CAS configuration catalog:
cas.ticket.st.max-length=20
Maximum length of generated service tickets.
|
cas.ticket.st.number-of-uses=1
Controls number of times a service ticket can be used within CAS server. Usage in CAS context means service ticket validation transaction.
|
cas.ticket.st.time-to-kill-in-seconds=10
Time in seconds that service tickets should be considered live in CAS server.
|
Configuration Metadata
The collection of configuration properties listed in this section are automatically generated from the CAS source and components that contain the actual field definitions, types, descriptions, modules, etc. This metadata may not always be 100% accurate, or could be lacking details and sufficient explanations.
Be Selective
This section is meant as a guide only. Do NOT copy/paste the entire collection of settings into your CAS configuration; rather pick only the properties that you need. Do NOT enable settings unless you are certain of their purpose and do NOT copy settings into your configuration only to keep them as reference. All these ideas lead to upgrade headaches, maintenance nightmares and premature aging.
YAGNI
Note that for nearly ALL use cases, declaring and configuring properties listed here is sufficient. You should NOT have to explicitly massage a CAS XML/Java/etc configuration file to design an authentication handler, create attribute release policies, etc. CAS at runtime will auto-configure all required changes for you. If you are unsure about the meaning of a given CAS setting, do NOT turn it on without hesitation. Review the codebase or better yet, ask questions to clarify the intended behavior.
Naming Convention
Property names can be specified in very relaxed terms. For instance cas.someProperty
, cas.some-property
, cas.some_property
are all valid names. While all
forms are accepted by CAS, there are certain components (in CAS and other frameworks used) whose activation at runtime is conditional on a property value, where
this property is required to have been specified in CAS configuration using kebab case. This is both true for properties that are owned by CAS as well as those
that might be presented to the system via an external library or framework such as Spring Boot, etc.
When possible, properties should be stored in lower-case kebab format, such as cas.property-name=value
.
The only possible exception to this rule is when naming actuator endpoints; The name of the
actuator endpoints (i.e. ssoSessions
) MUST remain in camelCase mode.
Settings and properties that are controlled by the CAS platform directly always begin with the prefix cas
. All other settings are controlled and provided
to CAS via other underlying frameworks and may have their own schemas and syntax. BE CAREFUL with
the distinction. Unrecognized properties are rejected by CAS and/or frameworks upon which CAS depends. This means if you somehow misspell a property definition
or fail to adhere to the dot-notation syntax and such, your setting is entirely refused by CAS and likely the feature it controls will never be activated in the
way you intend.
Validation
Configuration properties are automatically validated on CAS startup to report issues with configuration binding, specially if defined CAS settings cannot be
recognized or validated by the configuration schema. The validation process is on by default and can be skipped on startup using a special system
property SKIP_CONFIG_VALIDATION
that should be set to true
. Additional validation processes are also handled
via Configuration Metadata and property migrations applied automatically on
startup by Spring Boot and family.
Indexed Settings
CAS settings able to accept multiple values are typically documented with an index, such as cas.some.setting[0]=value
. The index [0]
is meant to be
incremented by the adopter to allow for distinct multiple configuration blocks.
Per Service
The expiration policy of service tickets can be conditionally decided on a per-application basis. The candidate service whose service ticket expiration policy is to deviate from the default configuration must be designed as such:
1
2
3
4
5
6
7
8
9
10
11
{
"@class" : "org.apereo.cas.services.CasRegisteredService",
"serviceId" : "^https://.*",
"name" : "Sample",
"id" : 10,
"serviceTicketExpirationPolicy": {
"@class": "org.apereo.cas.services.DefaultRegisteredServiceServiceTicketExpirationPolicy",
"numberOfUses": 1,
"timeToLive": "10"
}
}
Proxy Ticket Policies
PT
expiration policy governs the time span during which an authenticated user may attempt to validate an PT
.
Default
This is the default policy applied to proxy tickets where a ticket is expired after a fixed number of uses or after a maximum period of inactivity elapses.
The following settings and properties are available from the CAS configuration catalog:
cas.ticket.pt.number-of-uses=1
Number of uses allowed.
|
cas.ticket.pt.time-to-kill-in-seconds=10
Number of seconds after which this ticket becomes invalid.
|
Configuration Metadata
The collection of configuration properties listed in this section are automatically generated from the CAS source and components that contain the actual field definitions, types, descriptions, modules, etc. This metadata may not always be 100% accurate, or could be lacking details and sufficient explanations.
Be Selective
This section is meant as a guide only. Do NOT copy/paste the entire collection of settings into your CAS configuration; rather pick only the properties that you need. Do NOT enable settings unless you are certain of their purpose and do NOT copy settings into your configuration only to keep them as reference. All these ideas lead to upgrade headaches, maintenance nightmares and premature aging.
YAGNI
Note that for nearly ALL use cases, declaring and configuring properties listed here is sufficient. You should NOT have to explicitly massage a CAS XML/Java/etc configuration file to design an authentication handler, create attribute release policies, etc. CAS at runtime will auto-configure all required changes for you. If you are unsure about the meaning of a given CAS setting, do NOT turn it on without hesitation. Review the codebase or better yet, ask questions to clarify the intended behavior.
Naming Convention
Property names can be specified in very relaxed terms. For instance cas.someProperty
, cas.some-property
, cas.some_property
are all valid names. While all
forms are accepted by CAS, there are certain components (in CAS and other frameworks used) whose activation at runtime is conditional on a property value, where
this property is required to have been specified in CAS configuration using kebab case. This is both true for properties that are owned by CAS as well as those
that might be presented to the system via an external library or framework such as Spring Boot, etc.
When possible, properties should be stored in lower-case kebab format, such as cas.property-name=value
.
The only possible exception to this rule is when naming actuator endpoints; The name of the
actuator endpoints (i.e. ssoSessions
) MUST remain in camelCase mode.
Settings and properties that are controlled by the CAS platform directly always begin with the prefix cas
. All other settings are controlled and provided
to CAS via other underlying frameworks and may have their own schemas and syntax. BE CAREFUL with
the distinction. Unrecognized properties are rejected by CAS and/or frameworks upon which CAS depends. This means if you somehow misspell a property definition
or fail to adhere to the dot-notation syntax and such, your setting is entirely refused by CAS and likely the feature it controls will never be activated in the
way you intend.
Validation
Configuration properties are automatically validated on CAS startup to report issues with configuration binding, specially if defined CAS settings cannot be
recognized or validated by the configuration schema. The validation process is on by default and can be skipped on startup using a special system
property SKIP_CONFIG_VALIDATION
that should be set to true
. Additional validation processes are also handled
via Configuration Metadata and property migrations applied automatically on
startup by Spring Boot and family.
Indexed Settings
CAS settings able to accept multiple values are typically documented with an index, such as cas.some.setting[0]=value
. The index [0]
is meant to be
incremented by the adopter to allow for distinct multiple configuration blocks.
Per Service
The expiration policy of proxy tickets can be conditionally decided on a per-application basis. The candidate service whose proxy ticket expiration policy is to deviate from the default configuration must be designed as such:
1
2
3
4
5
6
7
8
9
10
11
{
"@class" : "org.apereo.cas.services.CasRegisteredService",
"serviceId" : "^https://.*",
"name" : "Sample",
"id" : 10,
"proxyTicketExpirationPolicy": {
"@class": "org.apereo.cas.services.DefaultRegisteredServiceProxyTicketExpirationPolicy",
"numberOfUses": 1,
"timeToLive": "30"
}
}
Proxy-Granting Ticket Policies
PGT
expiration policy governs the time span during which CAS may grant PTs with a valid (non-expired) PGT
.
Default
By default, the expiration policy assigned to proxy-granting tickets is controlled by the same policy assigned to ticket-granting tickets.
Per Service
The expiration policy of proxy granting tickets can be conditionally decided on a per-application basis. The candidate service whose proxy granting ticket expiration policy is to deviate from the default configuration must be designed as such:
1
2
3
4
5
6
7
8
9
10
{
"@class" : "org.apereo.cas.services.CasRegisteredService",
"serviceId" : "^https://.*",
"name" : "Sample",
"id" : 10,
"proxyGrantingTicketExpirationPolicy": {
"@class": "org.apereo.cas.services.DefaultRegisteredServiceProxyGrantingTicketExpirationPolicy",
"maxTimeToLiveInSeconds": 30
}
}
The following settings and properties are available from the CAS configuration catalog:
cas.ticket.pgt.max-length=50
Maximum length of the proxy granting ticket, when generating one.
|
Configuration Metadata
The collection of configuration properties listed in this section are automatically generated from the CAS source and components that contain the actual field definitions, types, descriptions, modules, etc. This metadata may not always be 100% accurate, or could be lacking details and sufficient explanations.
Be Selective
This section is meant as a guide only. Do NOT copy/paste the entire collection of settings into your CAS configuration; rather pick only the properties that you need. Do NOT enable settings unless you are certain of their purpose and do NOT copy settings into your configuration only to keep them as reference. All these ideas lead to upgrade headaches, maintenance nightmares and premature aging.
YAGNI
Note that for nearly ALL use cases, declaring and configuring properties listed here is sufficient. You should NOT have to explicitly massage a CAS XML/Java/etc configuration file to design an authentication handler, create attribute release policies, etc. CAS at runtime will auto-configure all required changes for you. If you are unsure about the meaning of a given CAS setting, do NOT turn it on without hesitation. Review the codebase or better yet, ask questions to clarify the intended behavior.
Naming Convention
Property names can be specified in very relaxed terms. For instance cas.someProperty
, cas.some-property
, cas.some_property
are all valid names. While all
forms are accepted by CAS, there are certain components (in CAS and other frameworks used) whose activation at runtime is conditional on a property value, where
this property is required to have been specified in CAS configuration using kebab case. This is both true for properties that are owned by CAS as well as those
that might be presented to the system via an external library or framework such as Spring Boot, etc.
When possible, properties should be stored in lower-case kebab format, such as cas.property-name=value
.
The only possible exception to this rule is when naming actuator endpoints; The name of the
actuator endpoints (i.e. ssoSessions
) MUST remain in camelCase mode.
Settings and properties that are controlled by the CAS platform directly always begin with the prefix cas
. All other settings are controlled and provided
to CAS via other underlying frameworks and may have their own schemas and syntax. BE CAREFUL with
the distinction. Unrecognized properties are rejected by CAS and/or frameworks upon which CAS depends. This means if you somehow misspell a property definition
or fail to adhere to the dot-notation syntax and such, your setting is entirely refused by CAS and likely the feature it controls will never be activated in the
way you intend.
Validation
Configuration properties are automatically validated on CAS startup to report issues with configuration binding, specially if defined CAS settings cannot be
recognized or validated by the configuration schema. The validation process is on by default and can be skipped on startup using a special system
property SKIP_CONFIG_VALIDATION
that should be set to true
. Additional validation processes are also handled
via Configuration Metadata and property migrations applied automatically on
startup by Spring Boot and family.
Indexed Settings
CAS settings able to accept multiple values are typically documented with an index, such as cas.some.setting[0]=value
. The index [0]
is meant to be
incremented by the adopter to allow for distinct multiple configuration blocks.
Transient Session Ticket Policies
TST expiration policy governs the time span during which CAS can track a specific activity tied to a session.
The following settings and properties are available from the CAS configuration catalog:
cas.ticket.tst.number-of-uses=1
Controls number of times a ticket can be used within CAS server.
|
cas.ticket.tst.time-to-kill-in-seconds=5
Number of seconds after which this ticket becomes invalid.
|
Configuration Metadata
The collection of configuration properties listed in this section are automatically generated from the CAS source and components that contain the actual field definitions, types, descriptions, modules, etc. This metadata may not always be 100% accurate, or could be lacking details and sufficient explanations.
Be Selective
This section is meant as a guide only. Do NOT copy/paste the entire collection of settings into your CAS configuration; rather pick only the properties that you need. Do NOT enable settings unless you are certain of their purpose and do NOT copy settings into your configuration only to keep them as reference. All these ideas lead to upgrade headaches, maintenance nightmares and premature aging.
YAGNI
Note that for nearly ALL use cases, declaring and configuring properties listed here is sufficient. You should NOT have to explicitly massage a CAS XML/Java/etc configuration file to design an authentication handler, create attribute release policies, etc. CAS at runtime will auto-configure all required changes for you. If you are unsure about the meaning of a given CAS setting, do NOT turn it on without hesitation. Review the codebase or better yet, ask questions to clarify the intended behavior.
Naming Convention
Property names can be specified in very relaxed terms. For instance cas.someProperty
, cas.some-property
, cas.some_property
are all valid names. While all
forms are accepted by CAS, there are certain components (in CAS and other frameworks used) whose activation at runtime is conditional on a property value, where
this property is required to have been specified in CAS configuration using kebab case. This is both true for properties that are owned by CAS as well as those
that might be presented to the system via an external library or framework such as Spring Boot, etc.
When possible, properties should be stored in lower-case kebab format, such as cas.property-name=value
.
The only possible exception to this rule is when naming actuator endpoints; The name of the
actuator endpoints (i.e. ssoSessions
) MUST remain in camelCase mode.
Settings and properties that are controlled by the CAS platform directly always begin with the prefix cas
. All other settings are controlled and provided
to CAS via other underlying frameworks and may have their own schemas and syntax. BE CAREFUL with
the distinction. Unrecognized properties are rejected by CAS and/or frameworks upon which CAS depends. This means if you somehow misspell a property definition
or fail to adhere to the dot-notation syntax and such, your setting is entirely refused by CAS and likely the feature it controls will never be activated in the
way you intend.
Validation
Configuration properties are automatically validated on CAS startup to report issues with configuration binding, specially if defined CAS settings cannot be
recognized or validated by the configuration schema. The validation process is on by default and can be skipped on startup using a special system
property SKIP_CONFIG_VALIDATION
that should be set to true
. Additional validation processes are also handled
via Configuration Metadata and property migrations applied automatically on
startup by Spring Boot and family.
Indexed Settings
CAS settings able to accept multiple values are typically documented with an index, such as cas.some.setting[0]=value
. The index [0]
is meant to be
incremented by the adopter to allow for distinct multiple configuration blocks.