REST Attribute Resolution

The following configuration describes how to fetch and retrieve attributes from REST attribute repositories.

The following settings and properties are available from the CAS configuration catalog:

_{The configuration settings listed below are tagged as Required in the CAS configuration metadata. This flag indicates that the presence of the setting may be needed to activate or affect the behavior of the CAS feature and generally should be reviewed, possibly owned and adjusted. If the setting is assigned a default value, you do not need to strictly put the setting in your copy of the configuration, but should review it nonetheless to make sure it matches your deployment expectations.}

cas.authn.attribute-repository.rest[0].url=

The endpoint URL to contact and retrieve attributes.

org.apereo.cas.configuration.model.core.authentication.RestPrincipalAttributesProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

When possible, properties should be stored in lower-case kebab format, such as cas.property-name=value. The only possible exception to this rule is when naming actuator endpoints; The name of the actuator endpoints (i.e. ssoSessions) MUST remain in camelCase mode.

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.attribute-repository.rest[0].url=...

This is the most common form of property configuration that is recognized by CAS, regardless of the actual property source, which might in fact be managed separately outside the CAS environment, by another system or cloud framework.

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    attribute-repository: 
      rest[0]: 
        url: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.attribute-repository.rest[0].url="..." -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory. Note the placement of the system property which must be specified before the CAS web application is launched.

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_ATTRIBUTE_REPOSITORY_REST[0]_URL="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.attribute-repository.rest[0].url="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

_{The configuration settings listed below are tagged as Optional in the CAS configuration metadata. This
flag indicates that the presence of the setting
is not immediately necessary in the end-user CAS configuration, because a default value is assigned or
the activation of the feature is not conditionally controlled by the setting value. In other words, you should only include this field in your
configuration if you need to modify the default value or if you need to turn on the feature controlled by the setting.}

cas.authn.attribute-repository.rest=

Retrieve attributes from multiple REST endpoints.

org.apereo.cas.configuration.model.core.authentication.PrincipalAttributesProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.attribute-repository.rest=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    attribute-repository: 
      rest: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.attribute-repository.rest="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_ATTRIBUTE_REPOSITORY_REST="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.attribute-repository.rest="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.attribute-repository.rest[0].basic-auth-password=

If REST endpoint is protected via basic authentication, specify the password for authentication.

org.apereo.cas.configuration.model.core.authentication.RestPrincipalAttributesProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.attribute-repository.rest[0].basic-auth-password=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    attribute-repository: 
      rest[0]: 
        basic-auth-password: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.attribute-repository.rest[0].basic-auth-password="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_ATTRIBUTE_REPOSITORY_REST[0]_BASIC_AUTH_PASSWORD="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.attribute-repository.rest[0].basic-auth-password="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.attribute-repository.rest[0].basic-auth-username=

If REST endpoint is protected via basic authentication, specify the username for authentication.

org.apereo.cas.configuration.model.core.authentication.RestPrincipalAttributesProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.attribute-repository.rest[0].basic-auth-username=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    attribute-repository: 
      rest[0]: 
        basic-auth-username: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.attribute-repository.rest[0].basic-auth-username="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_ATTRIBUTE_REPOSITORY_REST[0]_BASIC_AUTH_USERNAME="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.attribute-repository.rest[0].basic-auth-username="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.attribute-repository.rest[0].case-insensitive=

Whether attribute repository should consider the underlying attribute names in a case-insensitive manner.

org.apereo.cas.configuration.model.core.authentication.RestPrincipalAttributesProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.attribute-repository.rest[0].case-insensitive=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    attribute-repository: 
      rest[0]: 
        case-insensitive: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.attribute-repository.rest[0].case-insensitive="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_ATTRIBUTE_REPOSITORY_REST[0]_CASE_INSENSITIVE="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.attribute-repository.rest[0].case-insensitive="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.attribute-repository.rest[0].headers=

Headers, defined as a Map, to include in the request when making the REST call. Will overwrite any header that CAS is pre-defined to send and include in the request. Key in the map should be the header name and the value in the map should be the header value.

org.apereo.cas.configuration.model.core.authentication.RestPrincipalAttributesProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.attribute-repository.rest[0].headers=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    attribute-repository: 
      rest[0]: 
        headers: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.attribute-repository.rest[0].headers="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_ATTRIBUTE_REPOSITORY_REST[0]_HEADERS="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.attribute-repository.rest[0].headers="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.attribute-repository.rest[0].id=

A value can be assigned to this field to uniquely identify this resolver.

org.apereo.cas.configuration.model.core.authentication.RestPrincipalAttributesProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.attribute-repository.rest[0].id=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    attribute-repository: 
      rest[0]: 
        id: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.attribute-repository.rest[0].id="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_ATTRIBUTE_REPOSITORY_REST[0]_ID="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.attribute-repository.rest[0].id="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.attribute-repository.rest[0].method=GET

HTTP method to use when contacting the rest endpoint. Examples include GET, POST, etc.

org.apereo.cas.configuration.model.core.authentication.RestPrincipalAttributesProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.attribute-repository.rest[0].method=GET

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    attribute-repository: 
      rest[0]: 
        method: "GET"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.attribute-repository.rest[0].method="GET" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_ATTRIBUTE_REPOSITORY_REST[0]_METHOD="GET"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.attribute-repository.rest[0].method="GET"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.attribute-repository.rest[0].order=

The order of this attribute repository in the chain of repositories. Can be used to explicitly position this source in chain and affects merging strategies.

org.apereo.cas.configuration.model.core.authentication.RestPrincipalAttributesProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.attribute-repository.rest[0].order=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    attribute-repository: 
      rest[0]: 
        order: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.attribute-repository.rest[0].order="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_ATTRIBUTE_REPOSITORY_REST[0]_ORDER="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.attribute-repository.rest[0].order="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.attribute-repository.rest[0].state=ACTIVE

Whether attribute resolution based on this source is enabled. Available values are as follows:

ACTIVE: Active and enabled repository, and is invoked by default automatically.
DISABLED: Attribute repository is disabled and will not be used to resolve people and attributes.
STANDBY: Repository is in a semi-enabled state, waiting to be called only on-demand when explicitly asked for and will not be registered into the resolution plan.

org.apereo.cas.configuration.model.core.authentication.RestPrincipalAttributesProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.attribute-repository.rest[0].state=ACTIVE

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    attribute-repository: 
      rest[0]: 
        state: "ACTIVE"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.attribute-repository.rest[0].state="ACTIVE" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_ATTRIBUTE_REPOSITORY_REST[0]_STATE="ACTIVE"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.attribute-repository.rest[0].state="ACTIVE"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.attribute-repository.rest[0].username-attribute=username

The attribute name that would be used to look up and determine the user id from the query map. The value linked to this attribute would be used as the username or subject by the attribute repository to pass on to the ultimate source to locate the user record.

org.apereo.cas.configuration.model.core.authentication.RestPrincipalAttributesProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.attribute-repository.rest[0].username-attribute=username

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    attribute-repository: 
      rest[0]: 
        username-attribute: "username"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.attribute-repository.rest[0].username-attribute="username" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_ATTRIBUTE_REPOSITORY_REST[0]_USERNAME_ATTRIBUTE="username"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.attribute-repository.rest[0].username-attribute="username"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

# Retrieve attributes from multiple REST endpoints.
# cas.authn.attribute-repository.rest=

# If REST endpoint is protected via basic authentication, specify the password for authentication.
# cas.authn.attribute-repository.rest[0].basic-auth-password=

# If REST endpoint is protected via basic authentication, specify the username for authentication.
# cas.authn.attribute-repository.rest[0].basic-auth-username=

# Whether attribute repository should consider the underlying attribute names in a case-insensitive manner.
# cas.authn.attribute-repository.rest[0].case-insensitive=

# Headers, defined as a Map, to include in the request when making the REST call.
# cas.authn.attribute-repository.rest[0].headers=

# A value can be assigned to this field to uniquely identify this resolver.
# cas.authn.attribute-repository.rest[0].id=

# HTTP method to use when contacting the rest endpoint.
# cas.authn.attribute-repository.rest[0].method=GET

# The order of this attribute repository in the chain of repositories.
# cas.authn.attribute-repository.rest[0].order=

# Whether attribute resolution based on this source is enabled.
# cas.authn.attribute-repository.rest[0].state=ACTIVE

# The attribute name that would be used to look up and determine the user id from the query map.
# cas.authn.attribute-repository.rest[0].username-attribute=username

Configuration Metadata

The collection of configuration properties listed in this section are automatically generated from the CAS source and components that contain the actual field definitions, types, descriptions, modules, etc. This metadata may not always be 100% accurate, or could be lacking details and sufficient explanations.

Be Selective

This section is meant as a guide only. Do NOT copy/paste the entire collection of settings into your CAS configuration; rather pick only the properties that you need. Do NOT enable settings unless you are certain of their purpose and do NOT copy settings into your configuration only to keep them as reference. All these ideas lead to upgrade headaches, maintenance nightmares and premature aging.

YAGNI

Note that for nearly ALL use cases, declaring and configuring properties listed here is sufficient. You should NOT have to explicitly massage a CAS XML/Java/etc configuration file to design an authentication handler, create attribute release policies, etc. CAS at runtime will auto-configure all required changes for you. If you are unsure about the meaning of a given CAS setting, do NOT turn it on without hesitation. Review the codebase or better yet, ask questions to clarify the intended behavior.

Naming Convention

Property names can be specified in very relaxed terms. For instance cas.someProperty, cas.some-property, cas.some_property are all valid names. While all forms are accepted by CAS, there are certain components (in CAS and other frameworks used) whose activation at runtime is conditional on a property value, where this property is required to have been specified in CAS configuration using kebab case. This is both true for properties that are owned by CAS as well as those that might be presented to the system via an external library or framework such as Spring Boot, etc.

Note

Settings and properties that are controlled by the CAS platform directly always begin with the prefix cas. All other settings are controlled and provided to CAS via other underlying frameworks and may have their own schemas and syntax. BE CAREFUL with the distinction. Unrecognized properties are rejected by CAS and/or frameworks upon which CAS depends. This means if you somehow misspell a property definition or fail to adhere to the dot-notation syntax and such, your setting is entirely refused by CAS and likely the feature it controls will never be activated in the way you intend.

Validation

Configuration properties are automatically validated on CAS startup to report issues with configuration binding, specially if defined CAS settings cannot be recognized or validated by the configuration schema. Additional validation processes are also handled via Configuration Metadata and property migrations applied automatically on startup by Spring Boot and family.

Indexed Settings

CAS settings able to accept multiple values are typically documented with an index, such as cas.some.setting[0]=value. The index [0] is meant to be incremented by the adopter to allow for distinct multiple configuration blocks.

The authenticating user id is passed in form of a request parameter under username. The response is expected to be a JSON map as such:

{
  "name" : "JohnSmith",
  "age" : 29,
  "messages": ["msg 1", "msg 2", "msg 3"]
}