MongoDb Google Authenticator Registration

Registration records and tokens may be kept inside a MongoDb instance, via the following module:

<dependency>
    <groupId>org.apereo.cas</groupId>
    <artifactId>cas-server-support-gauth-mongo</artifactId>
    <version>${cas.version}</version>
</dependency>

implementation "org.apereo.cas:cas-server-support-gauth-mongo:${project.'cas.version'}"

dependencyManagement {
    imports {
        mavenBom "org.apereo.cas:cas-server-support-bom:${project.'cas.version'}"
    }
}

dependencies {
    implementation "org.apereo.cas:cas-server-support-gauth-mongo"
}

dependencies {
    /*
    The following platform references should be included automatically and are listed here for reference only.
            
    implementation enforcedPlatform("org.apereo.cas:cas-server-support-bom:${project.'cas.version'}")
    implementation platform(org.springframework.boot.gradle.plugin.SpringBootPlugin.BOM_COORDINATES)
    */

    implementation "org.apereo.cas:cas-server-support-gauth-mongo"
}

The following settings and properties are available from the CAS configuration catalog:

_{The configuration settings listed below are tagged as Required in the CAS configuration metadata. This flag indicates that the presence of the setting may be needed to activate or affect the behavior of the CAS feature and generally should be reviewed, possibly owned and adjusted. If the setting is assigned a default value, you do not need to strictly put the setting in your copy of the configuration, but should review it nonetheless to make sure it matches your deployment expectations.}

cas.authn.mfa.gauth.mongo.client-uri=

The connection uri to the mongodb instance. This typically takes on the form of mongodb://user:psw@ds135522.somewhere.com:35522/db. If not specified, will fallback onto other individual settings. If specified, takes over all other settings where applicable.

org.apereo.cas.configuration.model.support.mfa.gauth.MongoDbGoogleAuthenticatorMultifactorProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

When possible, properties should be stored in lower-case kebab format, such as cas.property-name=value. The only possible exception to this rule is when naming actuator endpoints; The name of the actuator endpoints (i.e. ssoSessions) MUST remain in camelCase mode.

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.client-uri=...

This is the most common form of property configuration that is recognized by CAS, regardless of the actual property source, which might in fact be managed separately outside the CAS environment, by another system or cloud framework.

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          client-uri: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.client-uri="..." -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory. Note the placement of the system property which must be specified before the CAS web application is launched.

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_CLIENT_URI="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.client-uri="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.collection=

MongoDb database collection name to fetch and/or create.

org.apereo.cas.configuration.model.support.mfa.gauth.MongoDbGoogleAuthenticatorMultifactorProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.collection=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          collection: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.collection="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_COLLECTION="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.collection="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.database-name=

MongoDb database instance name.

org.apereo.cas.configuration.model.support.mfa.gauth.MongoDbGoogleAuthenticatorMultifactorProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.database-name=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          database-name: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.database-name="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_DATABASE_NAME="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.database-name="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.host=localhost

MongoDb database host for authentication. Multiple host addresses may be defined, separated by comma. If more than one host is defined, it is assumed that each host contains the port as well, if any. Otherwise the configuration may fallback onto the port defined.

org.apereo.cas.configuration.model.support.mfa.gauth.MongoDbGoogleAuthenticatorMultifactorProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.host=localhost

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          host: "localhost"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.host="localhost" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_HOST="localhost"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.host="localhost"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.password=

MongoDb database password for authentication.

org.apereo.cas.configuration.model.support.mfa.gauth.MongoDbGoogleAuthenticatorMultifactorProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.password=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          password: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.password="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_PASSWORD="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.password="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.port=27017

MongoDb database port.

org.apereo.cas.configuration.model.support.mfa.gauth.MongoDbGoogleAuthenticatorMultifactorProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.port=27017

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          port: "27017"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.port="27017" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_PORT="27017"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.port="27017"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.token-collection=

Collection name where tokens are kept to prevent replay attacks.

org.apereo.cas.configuration.model.support.mfa.gauth.MongoDbGoogleAuthenticatorMultifactorProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.token-collection=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          token-collection: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.token-collection="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_TOKEN_COLLECTION="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.token-collection="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.user-id=

MongoDb database user for authentication.

org.apereo.cas.configuration.model.support.mfa.gauth.MongoDbGoogleAuthenticatorMultifactorProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.user-id=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          user-id: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.user-id="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_USER_ID="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.user-id="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

_{The configuration settings listed below are tagged as Optional in the CAS configuration metadata. This
flag indicates that the presence of the setting
is not immediately necessary in the end-user CAS configuration, because a default value is assigned or
the activation of the feature is not conditionally controlled by the setting value. In other words, you should only include this field in your
configuration if you need to modify the default value or if you need to turn on the feature controlled by the setting.}

cas.authn.mfa.gauth.mongo.authentication-database-name=

Name of the database to use for authentication.

org.apereo.cas.configuration.model.support.mfa.gauth.MongoDbGoogleAuthenticatorMultifactorProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.authentication-database-name=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          authentication-database-name: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.authentication-database-name="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_AUTHENTICATION_DATABASE_NAME="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.authentication-database-name="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.drop-collection=false

Whether collections should be dropped on startup and re-created.

org.apereo.cas.configuration.model.support.mfa.gauth.MongoDbGoogleAuthenticatorMultifactorProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.drop-collection=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          drop-collection: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.drop-collection="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_DROP_COLLECTION="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.drop-collection="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.read-concern=AVAILABLE

Read concern. Accepted values are:

LOCAL
MAJORITY
LINEARIZABLE
SNAPSHOT
AVAILABLE

org.apereo.cas.configuration.model.support.mfa.gauth.MongoDbGoogleAuthenticatorMultifactorProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.read-concern=AVAILABLE

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          read-concern: "AVAILABLE"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.read-concern="AVAILABLE" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_READ_CONCERN="AVAILABLE"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.read-concern="AVAILABLE"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.read-preference=PRIMARY

Read preference. Accepted values are:

PRIMARY
SECONDARY
SECONDARY_PREFERRED
PRIMARY_PREFERRED
NEAREST

org.apereo.cas.configuration.model.support.mfa.gauth.MongoDbGoogleAuthenticatorMultifactorProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.read-preference=PRIMARY

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          read-preference: "PRIMARY"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.read-preference="PRIMARY" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_READ_PREFERENCE="PRIMARY"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.read-preference="PRIMARY"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.replica-set=

A replica set in MongoDB is a group of mongod processes that maintain the same data set. Replica sets provide redundancy and high availability, and are the basis for all production deployments.

org.apereo.cas.configuration.model.support.mfa.gauth.MongoDbGoogleAuthenticatorMultifactorProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.replica-set=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          replica-set: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.replica-set="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_REPLICA_SET="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.replica-set="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.retry-writes=false

Sets whether writes should be retried if they fail due to a network error.

org.apereo.cas.configuration.model.support.mfa.gauth.MongoDbGoogleAuthenticatorMultifactorProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.retry-writes=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          retry-writes: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.retry-writes="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_RETRY_WRITES="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.retry-writes="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.socket-keep-alive=false

Whether the database socket connection should be tagged with keep-alive.

org.apereo.cas.configuration.model.support.mfa.gauth.MongoDbGoogleAuthenticatorMultifactorProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.socket-keep-alive=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          socket-keep-alive: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.socket-keep-alive="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_SOCKET_KEEP_ALIVE="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.socket-keep-alive="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.ssl-enabled=false

Whether connections require SSL.

org.apereo.cas.configuration.model.support.mfa.gauth.MongoDbGoogleAuthenticatorMultifactorProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.ssl-enabled=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          ssl-enabled: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.ssl-enabled="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_SSL_ENABLED="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.ssl-enabled="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.timeout=PT5S

MongoDb database connection timeout.

This settings supports the java.time.Duration syntax ^[?].

org.apereo.cas.configuration.model.support.mfa.gauth.MongoDbGoogleAuthenticatorMultifactorProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.timeout=PT5S

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          timeout: "PT5S"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.timeout="PT5S" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_TIMEOUT="PT5S"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.timeout="PT5S"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.write-concern=ACKNOWLEDGED

Write concern describes the level of acknowledgement requested from MongoDB for write operations to a standalone mongo db or to replica sets or to sharded clusters. In sharded clusters, mongo db instances will pass the write concern on to the shards.

org.apereo.cas.configuration.model.support.mfa.gauth.MongoDbGoogleAuthenticatorMultifactorProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.write-concern=ACKNOWLEDGED

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          write-concern: "ACKNOWLEDGED"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.write-concern="ACKNOWLEDGED" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_WRITE_CONCERN="ACKNOWLEDGED"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.write-concern="ACKNOWLEDGED"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.pool.idle-time=PT30S

The maximum idle time of a pooled connection. A zero value indicates no limit to the idle time. A pooled connection that has exceeded its idle time will be closed and replaced when necessary by a new connection.

This settings supports the java.time.Duration syntax ^[?].

org.apereo.cas.configuration.model.support.mongo.MongoDbConnectionPoolProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.pool.idle-time=PT30S

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          pool: 
            idle-time: "PT30S"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.pool.idle-time="PT30S" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_POOL_IDLE_TIME="PT30S"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.pool.idle-time="PT30S"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.pool.life-time=PT60S

The maximum time a pooled connection can live for. A zero value indicates no limit to the life time. A pooled connection that has exceeded its life time will be closed and replaced when necessary by a new connection.

This settings supports the java.time.Duration syntax ^[?].

org.apereo.cas.configuration.model.support.mongo.MongoDbConnectionPoolProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.pool.life-time=PT60S

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          pool: 
            life-time: "PT60S"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.pool.life-time="PT60S" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_POOL_LIFE_TIME="PT60S"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.pool.life-time="PT60S"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.pool.max-size=10

Maximum number of connections to keep around.

org.apereo.cas.configuration.model.support.mongo.MongoDbConnectionPoolProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.pool.max-size=10

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          pool: 
            max-size: "10"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.pool.max-size="10" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_POOL_MAX_SIZE="10"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.pool.max-size="10"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.pool.max-wait-time=PT60S

The maximum time that a thread may wait for a connection to become available.

This settings supports the java.time.Duration syntax ^[?].

org.apereo.cas.configuration.model.support.mongo.MongoDbConnectionPoolProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.pool.max-wait-time=PT60S

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          pool: 
            max-wait-time: "PT60S"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.pool.max-wait-time="PT60S" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_POOL_MAX_WAIT_TIME="PT60S"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.pool.max-wait-time="PT60S"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.pool.min-size=1

Minimum number of connections to keep around.

org.apereo.cas.configuration.model.support.mongo.MongoDbConnectionPoolProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.pool.min-size=1

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          pool: 
            min-size: "1"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.pool.min-size="1" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_POOL_MIN_SIZE="1"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.pool.min-size="1"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.mfa.gauth.mongo.pool.per-host=10

Total number of connections allowed per host.

org.apereo.cas.configuration.model.support.mongo.MongoDbConnectionPoolProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.mfa.gauth.mongo.pool.per-host=10

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    mfa: 
      gauth: 
        mongo: 
          pool: 
            per-host: "10"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.mfa.gauth.mongo.pool.per-host="10" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_MFA_GAUTH_MONGO_POOL_PER_HOST="10"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.mfa.gauth.mongo.pool.per-host="10"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

# Name of the database to use for authentication.
# cas.authn.mfa.gauth.mongo.authentication-database-name=

# Whether collections should be dropped on startup and re-created.
# cas.authn.mfa.gauth.mongo.drop-collection=false

# Read concern.
# cas.authn.mfa.gauth.mongo.read-concern=AVAILABLE

# Read preference.
# cas.authn.mfa.gauth.mongo.read-preference=PRIMARY

# A replica set in MongoDB is a group of {@code mongod} processes that maintain the same data set.
# cas.authn.mfa.gauth.mongo.replica-set=

# Sets whether writes should be retried if they fail due to a network error.
# cas.authn.mfa.gauth.mongo.retry-writes=false

# Whether the database socket connection should be tagged with keep-alive.
# cas.authn.mfa.gauth.mongo.socket-keep-alive=false

# Whether connections require SSL.
# cas.authn.mfa.gauth.mongo.ssl-enabled=false

# MongoDb database connection timeout.
# cas.authn.mfa.gauth.mongo.timeout=PT5S

# Write concern describes the level of acknowledgement requested from MongoDB for write operations to a standalone mongo db or to replica sets or to sharded clusters.
# cas.authn.mfa.gauth.mongo.write-concern=ACKNOWLEDGED

# The maximum idle time of a pooled connection.
# cas.authn.mfa.gauth.mongo.pool.idle-time=PT30S

# The maximum time a pooled connection can live for.
# cas.authn.mfa.gauth.mongo.pool.life-time=PT60S

# Maximum number of connections to keep around.
# cas.authn.mfa.gauth.mongo.pool.max-size=10

# The maximum time that a thread may wait for a connection to become available.
# cas.authn.mfa.gauth.mongo.pool.max-wait-time=PT60S

# Minimum number of connections to keep around.
# cas.authn.mfa.gauth.mongo.pool.min-size=1

# Total number of connections allowed per host.
# cas.authn.mfa.gauth.mongo.pool.per-host=10

Configuration Metadata

The collection of configuration properties listed in this section are automatically generated from the CAS source and components that contain the actual field definitions, types, descriptions, modules, etc. This metadata may not always be 100% accurate, or could be lacking details and sufficient explanations.

Be Selective

This section is meant as a guide only. Do NOT copy/paste the entire collection of settings into your CAS configuration; rather pick only the properties that you need. Do NOT enable settings unless you are certain of their purpose and do NOT copy settings into your configuration only to keep them as reference. All these ideas lead to upgrade headaches, maintenance nightmares and premature aging.

YAGNI

Note that for nearly ALL use cases, declaring and configuring properties listed here is sufficient. You should NOT have to explicitly massage a CAS XML/Java/etc configuration file to design an authentication handler, create attribute release policies, etc. CAS at runtime will auto-configure all required changes for you. If you are unsure about the meaning of a given CAS setting, do NOT turn it on without hesitation. Review the codebase or better yet, ask questions to clarify the intended behavior.

Naming Convention

Property names can be specified in very relaxed terms. For instance cas.someProperty, cas.some-property, cas.some_property are all valid names. While all forms are accepted by CAS, there are certain components (in CAS and other frameworks used) whose activation at runtime is conditional on a property value, where this property is required to have been specified in CAS configuration using kebab case. This is both true for properties that are owned by CAS as well as those that might be presented to the system via an external library or framework such as Spring Boot, etc.

Note

Settings and properties that are controlled by the CAS platform directly always begin with the prefix cas. All other settings are controlled and provided to CAS via other underlying frameworks and may have their own schemas and syntax. BE CAREFUL with the distinction. Unrecognized properties are rejected by CAS and/or frameworks upon which CAS depends. This means if you somehow misspell a property definition or fail to adhere to the dot-notation syntax and such, your setting is entirely refused by CAS and likely the feature it controls will never be activated in the way you intend.

Validation

Configuration properties are automatically validated on CAS startup to report issues with configuration binding, specially if defined CAS settings cannot be recognized or validated by the configuration schema. Additional validation processes are also handled via Configuration Metadata and property migrations applied automatically on startup by Spring Boot and family.

Indexed Settings

CAS settings able to accept multiple values are typically documented with an index, such as cas.some.setting[0]=value. The index [0] is meant to be incremented by the adopter to allow for distinct multiple configuration blocks.