Delegated Authentication - Authentication Policy

Service definitions may be conditionally authorized to use an external identity provider by defining their own access strategy and authentication policy:

{
  "@class" : "org.apereo.cas.services.CasRegisteredService",
  "serviceId" : "sample",
  "name" : "sample",
  "id" : 100,
  "accessStrategy" : {
    "@class" : "org.apereo.cas.services.DefaultRegisteredServiceAccessStrategy",
    "delegatedAuthenticationPolicy" : {
      "@class" : "org.apereo.cas.services.DefaultRegisteredServiceDelegatedAuthenticationPolicy",
      "allowedProviders" : [ "java.util.ArrayList", [ "Facebook", "Twitter" ] ],
      "permitUndefined": true,
      "exclusive": false,
      "selectionStrategy": "file:/path/to/script.groovy"
    }
  }
}

The following fields are supported for the authentication policy:

Type	Description
`allowedProviders`	The list of allowed providers should contain the external identity provider names (i.e. client names).
`permitUndefined`	Decides whether access should be granted in the event that no allowed providers are defined explicitly.
`exclusive`	Decides whether authentication should be exclusively limited to allowed providers, disabling other methods such as username/password, etc.
`selectionStrategy`	Decides how to select and redirect to the identity provider in a scripted fashion.

Configuration

The following settings and properties are available from the CAS configuration catalog:

_{The configuration settings listed below are tagged as Required in the CAS configuration metadata. This flag indicates that the presence of the setting may be needed to activate or affect the behavior of the CAS feature and generally should be reviewed, possibly owned and adjusted. If the setting is assigned a default value, you do not need to strictly put the setting in your copy of the configuration, but should review it nonetheless to make sure it matches your deployment expectations.}

cas.authn.pac4j.core.groovy-authentication-request-customizer.location=

The location of the resource. Resources can be URLs, or files found either on the classpath or outside somewhere in the file system.

In the event the configured resource is a Groovy script, specially if the script set to reload on changes, you may need to adjust the total number of inotify instances. On Linux, you may need to add the following line to /etc/sysctl.conf: fs.inotify.max_user_instances = 256.

You can check the current value via cat /proc/sys/fs/inotify/max_user_instances.

In situations and scenarios where CAS is able to automatically watch the underlying resource for changes and detect updates and modifications dynamically, you may be able to specify the following setting as either an environment variable or system property with a value of false to disable the resource watcher: org.apereo.cas.util.io.PathWatcherService.

org.apereo.cas.configuration.model.SpringResourceProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

When possible, properties should be stored in lower-case kebab format, such as cas.property-name=value. The only possible exception to this rule is when naming actuator endpoints; The name of the actuator endpoints (i.e. ssoSessions) MUST remain in camelCase mode.

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.groovy-authentication-request-customizer.location=...

This is the most common form of property configuration that is recognized by CAS, regardless of the actual property source, which might in fact be managed separately outside the CAS environment, by another system or cloud framework.

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        groovy-authentication-request-customizer: 
          location: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.groovy-authentication-request-customizer.location="..." -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory. Note the placement of the system property which must be specified before the CAS web application is launched.

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_GROOVY_AUTHENTICATION_REQUEST_CUSTOMIZER_LOCATION="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.groovy-authentication-request-customizer.location="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.groovy-provider-post-processor.location=

The location of the resource. Resources can be URLs, or files found either on the classpath or outside somewhere in the file system.

You can check the current value via cat /proc/sys/fs/inotify/max_user_instances.

org.apereo.cas.configuration.model.SpringResourceProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.groovy-provider-post-processor.location=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        groovy-provider-post-processor: 
          location: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.groovy-provider-post-processor.location="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_GROOVY_PROVIDER_POST_PROCESSOR_LOCATION="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.groovy-provider-post-processor.location="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.groovy-redirection-strategy.location=

The location of the resource. Resources can be URLs, or files found either on the classpath or outside somewhere in the file system.

You can check the current value via cat /proc/sys/fs/inotify/max_user_instances.

org.apereo.cas.configuration.model.SpringResourceProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.groovy-redirection-strategy.location=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        groovy-redirection-strategy: 
          location: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.groovy-redirection-strategy.location="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_GROOVY_REDIRECTION_STRATEGY_LOCATION="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.groovy-redirection-strategy.location="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.crypto.encryption.key=

The encryption key is a JWT whose length is defined by the encryption key size setting.

This setting supports the Spring Expression Language.

org.apereo.cas.configuration.model.core.util.EncryptionJwtCryptoProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.crypto.encryption.key=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            crypto: 
              encryption: 
                key: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.crypto.encryption.key="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_CRYPTO_ENCRYPTION_KEY="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.crypto.encryption.key="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.crypto.signing.key=

The signing key is a JWT whose length is defined by the signing key size setting.

This setting supports the Spring Expression Language.

org.apereo.cas.configuration.model.core.util.SigningJwtCryptoProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.crypto.signing.key=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            crypto: 
              signing: 
                key: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.crypto.signing.key="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_CRYPTO_SIGNING_KEY="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.crypto.signing.key="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.discovery-selection.json.location=

The location of the resource. Resources can be URLs, or files found either on the classpath or outside somewhere in the file system.

You can check the current value via cat /proc/sys/fs/inotify/max_user_instances.

org.apereo.cas.configuration.model.support.pac4j.Pac4jDelegatedAuthenticationDiscoverySelectionJsonProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.discovery-selection.json.location=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        discovery-selection: 
          json: 
            location: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.discovery-selection.json.location="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_DISCOVERY_SELECTION_JSON_LOCATION="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.discovery-selection.json.location="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.discovery-selection.selection-type=MENU

Indicate how the selection and presentation of identity providers would be controlled. Available values are as follows:

MENU: Defined identity providers will be listed for the user to select.
DYNAMIC: Defined identity providers are pre-built first, and one is chosen dynamically at runtime based on user attributes properties, domain identifier, etc.

org.apereo.cas.configuration.model.support.pac4j.Pac4jDelegatedAuthenticationDiscoverySelectionProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.discovery-selection.selection-type=MENU

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        discovery-selection: 
          selection-type: "MENU"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.discovery-selection.selection-type="MENU" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_DISCOVERY_SELECTION_SELECTION_TYPE="MENU"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.discovery-selection.selection-type="MENU"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

_{The configuration settings listed below are tagged as Optional in the CAS configuration metadata. This
flag indicates that the presence of the setting
is not immediately necessary in the end-user CAS configuration, because a default value is assigned or
the activation of the feature is not conditionally controlled by the setting value. In other words, you should only include this field in your
configuration if you need to modify the default value or if you need to turn on the feature controlled by the setting.}

cas.authn.pac4j.core.session-replication.replicate-sessions=true

Indicates whether profiles and other session data, collected as part of authentication flows and protocol requests that are kept by the container session, should be replicated across the cluster using CAS and its own ticket registry. Without this option, profile data and other related pieces of information should be manually replicated via means and libraries outside of CAS.

org.apereo.cas.configuration.model.support.replication.SessionReplicationProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.replicate-sessions=true

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          replicate-sessions: "true"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.replicate-sessions="true" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_REPLICATE_SESSIONS="true"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.replicate-sessions="true"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.crypto.alg=

The signing/encryption algorithm to use.

org.apereo.cas.configuration.model.core.util.EncryptionJwtSigningJwtCryptographyProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.crypto.alg=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            crypto: 
              alg: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.crypto.alg="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_CRYPTO_ALG="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.crypto.alg="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.crypto.enabled=true

Whether crypto operations are enabled.

org.apereo.cas.configuration.model.core.util.EncryptionJwtSigningJwtCryptographyProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.crypto.enabled=true

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            crypto: 
              enabled: "true"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.crypto.enabled="true" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_CRYPTO_ENABLED="true"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.crypto.enabled="true"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.crypto.encryption.key-size=512

The encryption key size.

org.apereo.cas.configuration.model.core.util.EncryptionJwtCryptoProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.crypto.encryption.key-size=512

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            crypto: 
              encryption: 
                key-size: "512"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.crypto.encryption.key-size="512" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_CRYPTO_ENCRYPTION_KEY_SIZE="512"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.crypto.encryption.key-size="512"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.crypto.signing.key-size=512

The signing key size.

org.apereo.cas.configuration.model.core.util.SigningJwtCryptoProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.crypto.signing.key-size=512

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            crypto: 
              signing: 
                key-size: "512"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.crypto.signing.key-size="512" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_CRYPTO_SIGNING_KEY_SIZE="512"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.crypto.signing.key-size="512"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.crypto.strategy-type=ENCRYPT_AND_SIGN

Control the cipher sequence of operations. The accepted values are:

ENCRYPT_AND_SIGN: Encrypt the value first, and then sign.
SIGN_AND_ENCRYPT: Sign the value first, and then encrypt.

org.apereo.cas.configuration.model.core.util.EncryptionJwtSigningJwtCryptographyProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.crypto.strategy-type=ENCRYPT_AND_SIGN

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            crypto: 
              strategy-type: "ENCRYPT_AND_SIGN"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.crypto.strategy-type="ENCRYPT_AND_SIGN" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_CRYPTO_STRATEGY_TYPE="ENCRYPT_AND_SIGN"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.crypto.strategy-type="ENCRYPT_AND_SIGN"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.allowed-ip-addresses-pattern=

A regular expression pattern that indicates the set of allowed IP addresses, when #isPinToSession() is configured. In the event that there is a mismatch between the cookie IP address and the current request-provided IP address (i.e. network switches, VPN, etc), the cookie can still be considered valid if the new IP address matches the pattern specified here.

This settings supports regular expression patterns. ^[?].

org.apereo.cas.configuration.model.support.replication.CookieSessionReplicationProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.allowed-ip-addresses-pattern=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            allowed-ip-addresses-pattern: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.allowed-ip-addresses-pattern="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_ALLOWED_IP_ADDRESSES_PATTERN="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.allowed-ip-addresses-pattern="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.auto-configure-cookie-path=true

Decide if cookie paths should be automatically configured based on the application context path, when the cookie path is not configured.

org.apereo.cas.configuration.model.support.replication.CookieSessionReplicationProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.auto-configure-cookie-path=true

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            auto-configure-cookie-path: "true"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.auto-configure-cookie-path="true" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_AUTO_CONFIGURE_COOKIE_PATH="true"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.auto-configure-cookie-path="true"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.domain=

Cookie domain. Specifies the domain within which this cookie should be presented. The form of the domain name is specified by RFC 2965. A domain name begins with a dot (.foo.com) and means that the cookie is visible to servers in a specified Domain Name System (DNS) zone (for example, www.foo.com, but not a.b.foo.com). By default, cookies are only returned to the server that sent them.

org.apereo.cas.configuration.model.support.replication.CookieSessionReplicationProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.domain=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            domain: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.domain="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_DOMAIN="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.domain="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.geo-locate-client-session=false

When set to true and assuming #isPinToSession() is also true, client sessions (using the client IP address) are geo-located using a geolocation service when/if configured. The resulting session is either pinned to the client geolocation, or the default client address.

org.apereo.cas.configuration.model.support.replication.CookieSessionReplicationProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.geo-locate-client-session=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            geo-locate-client-session: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.geo-locate-client-session="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_GEO_LOCATE_CLIENT_SESSION="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.geo-locate-client-session="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.http-only=true

true if this cookie contains the HttpOnly attribute. This means that the cookie should not be accessible to scripting engines, like javascript.

org.apereo.cas.configuration.model.support.replication.CookieSessionReplicationProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.http-only=true

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            http-only: "true"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.http-only="true" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_HTTP_ONLY="true"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.http-only="true"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.max-age=-1

The maximum age of the cookie, specified in seconds. By default, -1 indicating the cookie will persist until browser shutdown. A positive value indicates that the cookie will expire after that many seconds have passed. Note that the value is the maximum age when the cookie will expire, not the cookie's current age. A negative value means that the cookie is not stored persistently and will be deleted when the Web browser exits. A zero value causes the cookie to be deleted.

org.apereo.cas.configuration.model.support.replication.CookieSessionReplicationProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.max-age=-1

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            max-age: "-1"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.max-age="-1" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_MAX_AGE="-1"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.max-age="-1"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.name=

Cookie name. Constructs a cookie with a specified name and value. The name must conform to RFC 2965. That means it can contain only ASCII alphanumeric characters and cannot contain commas, semicolons, or white space or begin with a $ character. The cookie's name cannot be changed after creation. By default, cookies are created according to the RFC 2965 cookie specification. Cookie names are automatically calculated assigned by CAS at runtime, and there is usually no need to customize the name or assign it a different value unless a special use case warrants the change.

org.apereo.cas.configuration.model.support.replication.CookieSessionReplicationProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.name=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            name: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.name="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_NAME="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.name="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.path=

Cookie path. Specifies a path for the cookie to which the client should return the cookie. The cookie is visible to all the pages in the directory you specify, and all the pages in that directory's subdirectories. A cookie's path must include the servlet that set the cookie, for example, /catalog, which makes the cookie visible to all directories on the server under /catalog. Consult RFC 2965 (available on the Internet) for more information on setting path names for cookies.

org.apereo.cas.configuration.model.support.replication.CookieSessionReplicationProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.path=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            path: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.path="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_PATH="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.path="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.pin-to-session=true

When generating cookie values, determine whether the value should be compounded and signed with the properties of the current session, such as IP address, user-agent, etc.

org.apereo.cas.configuration.model.support.replication.CookieSessionReplicationProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.pin-to-session=true

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            pin-to-session: "true"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.pin-to-session="true" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_PIN_TO_SESSION="true"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.pin-to-session="true"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.same-site-policy=

If a cookie is only intended to be accessed in a first party context, the developer has the option to apply one of settings SameSite=Lax or SameSite=Strict or SameSite=None to prevent external access.

To safeguard more websites and their users, the new secure-by-default model assumes all cookies should be protected from external access unless otherwise specified. Developers must use a new cookie setting, SameSite=None, to designate cookies for cross-site access. When the SameSite=None attribute is present, an additional Secure attribute is used so cross-site cookies can only be accessed over HTTPS connections.

Accepted values are:

Lax
Strict
None
Off: Disable the generation of the SameSite cookie attribute altogether.
Path to a Groovy script that is able to generate the SameSite cookie attribute dynamically.
Fully qualified name of a class that implements org.apereo.cas.web.cookie.CookieSameSitePolicy

org.apereo.cas.configuration.model.support.replication.CookieSessionReplicationProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.same-site-policy=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            same-site-policy: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.same-site-policy="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_SAME_SITE_POLICY="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.same-site-policy="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.secure=true

True if sending this cookie should be restricted to a secure protocol, or false if the it can be sent using any protocol.

org.apereo.cas.configuration.model.support.replication.CookieSessionReplicationProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.secure=true

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            secure: "true"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.secure="true" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_SECURE="true"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.secure="true"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.cache-duration=PT8H

Control the expiration policy of the cache that holds onto the results.

This settings supports the java.time.Duration syntax ^[?].

org.apereo.cas.configuration.model.support.pac4j.Pac4jDelegatedAuthenticationCoreProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.cache-duration=PT8H

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        cache-duration: "PT8H"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.cache-duration="PT8H" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_CACHE_DURATION="PT8H"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.cache-duration="PT8H"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.cache-size=100

Control the size of the delegated identity provider cache that holds identity providers.

This setting specifies the maximum number of entries the cache may contain. Note that the cache may evict an entry before this limit is exceeded or temporarily exceed the threshold while evicting. As the cache size grows close to the maximum, the cache evicts entries that are less likely to be used again. For example, the cache may evict an entry because it hasn't been used recently or very often.

org.apereo.cas.configuration.model.support.pac4j.Pac4jDelegatedAuthenticationCoreProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.cache-size=100

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        cache-size: "100"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.cache-size="100" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_CACHE_SIZE="100"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.cache-size="100"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.discovery-selection.json.principal-attribute=

The name of the principal attribute whose values will be compared against the key pattern defined in the configuration rules. If a match is found, then the provider configuration block will be used as the selected provider. The matching routine will examine all attribute values linked to the principal attribute to find any acceptable match. When this setting left undefined, then the resolved principal id for the given user identifier will be used to locate the provider.

org.apereo.cas.configuration.model.support.pac4j.Pac4jDelegatedAuthenticationDiscoverySelectionJsonProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.discovery-selection.json.principal-attribute=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        discovery-selection: 
          json: 
            principal-attribute: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.discovery-selection.json.principal-attribute="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_DISCOVERY_SELECTION_JSON_PRINCIPAL_ATTRIBUTE="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.discovery-selection.json.principal-attribute="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.lazy-init=true

Whether initialization of delegated identity providers should be done eagerly typically during startup.

org.apereo.cas.configuration.model.support.pac4j.Pac4jDelegatedAuthenticationCoreProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.lazy-init=true

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        lazy-init: "true"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.lazy-init="true" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_LAZY_INIT="true"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.lazy-init="true"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.name=

The name of the authentication handler in CAS used for delegation.

org.apereo.cas.configuration.model.support.pac4j.Pac4jDelegatedAuthenticationCoreProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.name=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        name: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.name="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_NAME="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.name="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.order=

Order of the authentication handler in the chain.

org.apereo.cas.configuration.model.support.pac4j.Pac4jDelegatedAuthenticationCoreProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.order=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        order: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.order="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_ORDER="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.order="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.principal-id-attribute=

The attribute to use as the principal identifier built during and upon a successful authentication attempt.

org.apereo.cas.configuration.model.support.pac4j.Pac4jDelegatedAuthenticationCoreProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.principal-id-attribute=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        principal-id-attribute: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.principal-id-attribute="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_PRINCIPAL_ID_ATTRIBUTE="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.principal-id-attribute="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.typed-id-used=false

When constructing the final user profile from the delegated provider, determines if the provider id should be combined with the principal id.

org.apereo.cas.configuration.model.support.pac4j.Pac4jDelegatedAuthenticationCoreProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.typed-id-used=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        typed-id-used: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.typed-id-used="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_TYPED_ID_USED="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.typed-id-used="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

# Indicates whether profiles and other session data, collected as part of authentication flows and protocol requests that are kept by the container session, should be replicated across the cluster using CAS and its own ticket registry.
# cas.authn.pac4j.core.session-replication.replicate-sessions=true

# The signing/encryption algorithm to use.
# cas.authn.pac4j.core.session-replication.cookie.crypto.alg=

# Whether crypto operations are enabled.
# cas.authn.pac4j.core.session-replication.cookie.crypto.enabled=true

# The encryption key size.
# cas.authn.pac4j.core.session-replication.cookie.crypto.encryption.key-size=512

# The signing key size.
# cas.authn.pac4j.core.session-replication.cookie.crypto.signing.key-size=512

# Control the cipher sequence of operations.
# cas.authn.pac4j.core.session-replication.cookie.crypto.strategy-type=ENCRYPT_AND_SIGN

# A regular expression pattern that indicates the set of allowed IP addresses, when {@link #isPinToSession()} is configured.
# cas.authn.pac4j.core.session-replication.cookie.allowed-ip-addresses-pattern=

# Decide if cookie paths should be automatically configured based on the application context path, when the cookie path is not configured.
# cas.authn.pac4j.core.session-replication.cookie.auto-configure-cookie-path=true

# Cookie domain.
# cas.authn.pac4j.core.session-replication.cookie.domain=

# When set to {@code true} and assuming {@link #isPinToSession()} is also {@code true}, client sessions (using the client IP address) are geo-located using a geolocation service when/if configured.
# cas.authn.pac4j.core.session-replication.cookie.geo-locate-client-session=false

# true if this cookie contains the HttpOnly attribute.
# cas.authn.pac4j.core.session-replication.cookie.http-only=true

# The maximum age of the cookie, specified in seconds.
# cas.authn.pac4j.core.session-replication.cookie.max-age=-1

# Cookie name.
# cas.authn.pac4j.core.session-replication.cookie.name=

# Cookie path.
# cas.authn.pac4j.core.session-replication.cookie.path=

# When generating cookie values, determine whether the value should be compounded and signed with the properties of the current session, such as IP address, user-agent, etc.
# cas.authn.pac4j.core.session-replication.cookie.pin-to-session=true

# If a cookie is only intended to be accessed in a first party context, the developer has the option to apply one of settings {@code SameSite=Lax} or {@code SameSite=Strict} or {@code SameSite=None} to prevent external access.
# cas.authn.pac4j.core.session-replication.cookie.same-site-policy=

# True if sending this cookie should be restricted to a secure protocol, or false if the it can be sent using any protocol.
# cas.authn.pac4j.core.session-replication.cookie.secure=true

# Control the expiration policy of the cache that holds onto the results.
# cas.authn.pac4j.core.cache-duration=PT8H

# Control the size of the delegated identity provider cache that holds identity providers.
# cas.authn.pac4j.core.cache-size=100

# The name of the principal attribute whose values will be compared against the key pattern defined in the configuration rules.
# cas.authn.pac4j.core.discovery-selection.json.principal-attribute=

# Whether initialization of delegated identity providers should be done eagerly typically during startup.
# cas.authn.pac4j.core.lazy-init=true

# The name of the authentication handler in CAS used for delegation.
# cas.authn.pac4j.core.name=

# Order of the authentication handler in the chain.
# cas.authn.pac4j.core.order=

# The attribute to use as the principal identifier built during and upon a successful authentication attempt.
# cas.authn.pac4j.core.principal-id-attribute=

# When constructing the final user profile from the delegated provider, determines if the provider id should be combined with the principal id.
# cas.authn.pac4j.core.typed-id-used=false

cas.authn.pac4j.core.session-replication.cookie.crypto.encryption.key=

The encryption key is a JWT whose length is defined by the encryption key size setting.

This setting supports the Spring Expression Language.

org.apereo.cas.configuration.model.core.util.EncryptionJwtCryptoProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.crypto.encryption.key=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            crypto: 
              encryption: 
                key: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.crypto.encryption.key="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_CRYPTO_ENCRYPTION_KEY="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.crypto.encryption.key="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.crypto.signing.key=

The signing key is a JWT whose length is defined by the signing key size setting.

This setting supports the Spring Expression Language.

org.apereo.cas.configuration.model.core.util.SigningJwtCryptoProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.crypto.signing.key=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            crypto: 
              signing: 
                key: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.crypto.signing.key="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_CRYPTO_SIGNING_KEY="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.crypto.signing.key="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.crypto.alg=

The signing/encryption algorithm to use.

org.apereo.cas.configuration.model.core.util.EncryptionJwtSigningJwtCryptographyProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.crypto.alg=...

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            crypto: 
              alg: "..."

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.crypto.alg="..." -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_CRYPTO_ALG="..."

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.crypto.alg="..."

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.crypto.enabled=true

Whether crypto operations are enabled.

org.apereo.cas.configuration.model.core.util.EncryptionJwtSigningJwtCryptographyProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.crypto.enabled=true

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            crypto: 
              enabled: "true"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.crypto.enabled="true" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_CRYPTO_ENABLED="true"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.crypto.enabled="true"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.crypto.encryption.key-size=512

The encryption key size.

org.apereo.cas.configuration.model.core.util.EncryptionJwtCryptoProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.crypto.encryption.key-size=512

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            crypto: 
              encryption: 
                key-size: "512"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.crypto.encryption.key-size="512" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_CRYPTO_ENCRYPTION_KEY_SIZE="512"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.crypto.encryption.key-size="512"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.crypto.signing.key-size=512

The signing key size.

org.apereo.cas.configuration.model.core.util.SigningJwtCryptoProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.crypto.signing.key-size=512

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            crypto: 
              signing: 
                key-size: "512"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.crypto.signing.key-size="512" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_CRYPTO_SIGNING_KEY_SIZE="512"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.crypto.signing.key-size="512"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

cas.authn.pac4j.core.session-replication.cookie.crypto.strategy-type=ENCRYPT_AND_SIGN

Control the cipher sequence of operations. The accepted values are:

ENCRYPT_AND_SIGN: Encrypt the value first, and then sign.
SIGN_AND_ENCRYPT: Sign the value first, and then encrypt.

org.apereo.cas.configuration.model.core.util.EncryptionJwtSigningJwtCryptographyProperties.

_{How can I configure this property?}

Configuration properties can be included and activated using the following strategies.

Note

CAS properties can be specified using the Java configuration property syntax in any and all .properties files:

cas.authn.pac4j.core.session-replication.cookie.crypto.strategy-type=ENCRYPT_AND_SIGN

CAS properties can be specified using the YAML syntax:

cas: 
  authn: 
    pac4j: 
      core: 
        session-replication: 
          cookie: 
            crypto: 
              strategy-type: "ENCRYPT_AND_SIGN"

Note that YAML is very specific about structure and indentation. Be sure to verify the correctness of the final result with your YAML validator of choice.

CAS properties can be passed to the CAS web application as system properties, when the application is launched:

java -Dcas.authn.pac4j.core.session-replication.cookie.crypto.strategy-type="ENCRYPT_AND_SIGN" -jar build/libs/cas.war

CAS properties can specified as system environment variables before the CAS web application is launched:

export CAS_AUTHN_PAC4J_CORE_SESSION_REPLICATION_COOKIE_CRYPTO_STRATEGY_TYPE="ENCRYPT_AND_SIGN"

java -jar build/libs/cas.war

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

CAS properties can be passed to the CAS web application as command-line arguments, when the application is launched:

java -jar build/libs/cas.war --cas.authn.pac4j.core.session-replication.cookie.crypto.strategy-type="ENCRYPT_AND_SIGN"

The above example assumes that the CAS web application is packaged as cas.war with an embedded server container and can be found in the build/libs directory.

This CAS feature is able to accept signing and encryption crypto keys. In most scenarios if keys are not provided, CAS will auto-generate them. The following instructions apply if you wish to manually and beforehand create the signing and encryption keys.

Note that if you are asked to create a JWK of a certain size for the key, you are to use the following set of commands to generate the token:

wget https://raw.githubusercontent.com/apereo/cas/master/etc/jwk-gen.jar
java -jar jwk-gen.jar -t oct -s [size]

The outcome would be similar to:

{
  "kty": "oct",
  "kid": "...",
  "k": "..."
}

The generated value for k needs to be assigned to the relevant CAS settings. Note that keys generated via the above algorithm are processed by CAS using the Advanced Encryption Standard (AES) algorithm which is a specification for the encryption of electronic data established by the U.S. National Institute of Standards and Technology.

CAS takes advantage of Apache Groovy in forms of either embedded or external scripts that allow one to, by default, dynamically build constructs, attributes, access strategies and a lot more. To activate the functionality described here, you may need to prepare CAS to support and integrate with Apache Groovy.

Please review this guide to configure your build.

Configuration Metadata

The collection of configuration properties listed in this section are automatically generated from the CAS source and components that contain the actual field definitions, types, descriptions, modules, etc. This metadata may not always be 100% accurate, or could be lacking details and sufficient explanations.

Be Selective

This section is meant as a guide only. Do NOT copy/paste the entire collection of settings into your CAS configuration; rather pick only the properties that you need. Do NOT enable settings unless you are certain of their purpose and do NOT copy settings into your configuration only to keep them as reference. All these ideas lead to upgrade headaches, maintenance nightmares and premature aging.

YAGNI

Note that for nearly ALL use cases, declaring and configuring properties listed here is sufficient. You should NOT have to explicitly massage a CAS XML/Java/etc configuration file to design an authentication handler, create attribute release policies, etc. CAS at runtime will auto-configure all required changes for you. If you are unsure about the meaning of a given CAS setting, do NOT turn it on without hesitation. Review the codebase or better yet, ask questions to clarify the intended behavior.

Naming Convention

Property names can be specified in very relaxed terms. For instance cas.someProperty, cas.some-property, cas.some_property are all valid names. While all forms are accepted by CAS, there are certain components (in CAS and other frameworks used) whose activation at runtime is conditional on a property value, where this property is required to have been specified in CAS configuration using kebab case. This is both true for properties that are owned by CAS as well as those that might be presented to the system via an external library or framework such as Spring Boot, etc.

Note

Settings and properties that are controlled by the CAS platform directly always begin with the prefix cas. All other settings are controlled and provided to CAS via other underlying frameworks and may have their own schemas and syntax. BE CAREFUL with the distinction. Unrecognized properties are rejected by CAS and/or frameworks upon which CAS depends. This means if you somehow misspell a property definition or fail to adhere to the dot-notation syntax and such, your setting is entirely refused by CAS and likely the feature it controls will never be activated in the way you intend.

Validation

Configuration properties are automatically validated on CAS startup to report issues with configuration binding, specially if defined CAS settings cannot be recognized or validated by the configuration schema. Additional validation processes are also handled via Configuration Metadata and property migrations applied automatically on startup by Spring Boot and family.

Indexed Settings

CAS settings able to accept multiple values are typically documented with an index, such as cas.some.setting[0]=value. The index [0] is meant to be incremented by the adopter to allow for distinct multiple configuration blocks.

To prepare CAS to support and integrate with Apache Groovy, please review this guide.

Auto Redirection

See this guide for better details.