Delegated Authentication Provisioning

By default, user profiles that are extracted from external identity providers and merged into a CAS authenticated principal are not stored or tracked anywhere. CAS does provide additional options to allow such profiles to be managed outside of CAS and/or provisioned into identity stores, allowing you optionally to link external/guest accounts with their equivalent found in the authentication source used by CAS, etc.

  • The following settings and properties are available from the CAS configuration catalog:

    The configuration settings listed below are tagged as Required in the CAS configuration metadata. This flag indicates that the presence of the setting may be needed to activate or affect the behavior of the CAS feature and generally should be reviewed, possibly owned and adjusted. If the setting is assigned a default value, you do not need to strictly put the setting in your copy of the configuration, but should review it nonetheless to make sure it matches your deployment expectations.

  • cas.authn.pac4j.provisioning.groovy.location=

    • The location of the resource. Resources can be URLs, or files found either on the classpath or outside somewhere in the file system.

    In the event the configured resource is a Groovy script, specially if the script set to reload on changes, you may need to adjust the total number of inotify instances. On Linux, you may need to add the following line to /etc/sysctl.conf: fs.inotify.max_user_instances = 256.

    You can check the current value via cat /proc/sys/fs/inotify/max_user_instances.

    In situations and scenarios where CAS is able to automatically watch the underlying resource for changes and detect updates and modifications dynamically, you may be able to specify the following setting as either an environment variable or system property with a value of false to disable the resource watcher: org.apereo.cas.util.io.PathWatcherService.

    org.apereo.cas.configuration.model.support.pac4j.Pac4jDelegatedAuthenticationGroovyProvisioningProperties.

    How can I configure this property?

    The configuration settings listed below are tagged as Optional in the CAS configuration metadata. This flag indicates that the presence of the setting is not immediately necessary in the end-user CAS configuration, because a default value is assigned or the activation of the feature is not conditionally controlled by the setting value. In other words, you should only include this field in your configuration if you need to modify the default value or if you need to turn on the feature controlled by the setting.

    CAS takes advantage of Apache Groovy in forms of either embedded or external scripts that allow one to, by default, dynamically build constructs, attributes, access strategies and a lot more. To activate the functionality described here, you may need to prepare CAS to support and integrate with Apache Groovy.

    Please review this guide to configure your build.

    Configuration Metadata

    The collection of configuration properties listed in this section are automatically generated from the CAS source and components that contain the actual field definitions, types, descriptions, modules, etc. This metadata may not always be 100% accurate, or could be lacking details and sufficient explanations.

    Be Selective

    This section is meant as a guide only. Do NOT copy/paste the entire collection of settings into your CAS configuration; rather pick only the properties that you need. Do NOT enable settings unless you are certain of their purpose and do NOT copy settings into your configuration only to keep them as reference. All these ideas lead to upgrade headaches, maintenance nightmares and premature aging.

    YAGNI

    Note that for nearly ALL use cases, declaring and configuring properties listed here is sufficient. You should NOT have to explicitly massage a CAS XML/Java/etc configuration file to design an authentication handler, create attribute release policies, etc. CAS at runtime will auto-configure all required changes for you. If you are unsure about the meaning of a given CAS setting, do NOT turn it on without hesitation. Review the codebase or better yet, ask questions to clarify the intended behavior.

    Naming Convention

    Property names can be specified in very relaxed terms. For instance cas.someProperty, cas.some-property, cas.some_property are all valid names. While all forms are accepted by CAS, there are certain components (in CAS and other frameworks used) whose activation at runtime is conditional on a property value, where this property is required to have been specified in CAS configuration using kebab case. This is both true for properties that are owned by CAS as well as those that might be presented to the system via an external library or framework such as Spring Boot, etc.

    :information_source: Note

    When possible, properties should be stored in lower-case kebab format, such as cas.property-name=value. The only possible exception to this rule is when naming actuator endpoints; The name of the actuator endpoints (i.e. ssoSessions) MUST remain in camelCase mode.

    Settings and properties that are controlled by the CAS platform directly always begin with the prefix cas. All other settings are controlled and provided to CAS via other underlying frameworks and may have their own schemas and syntax. BE CAREFUL with the distinction. Unrecognized properties are rejected by CAS and/or frameworks upon which CAS depends. This means if you somehow misspell a property definition or fail to adhere to the dot-notation syntax and such, your setting is entirely refused by CAS and likely the feature it controls will never be activated in the way you intend.

    Validation

    Configuration properties are automatically validated on CAS startup to report issues with configuration binding, specially if defined CAS settings cannot be recognized or validated by the configuration schema. Additional validation processes are also handled via Configuration Metadata and property migrations applied automatically on startup by Spring Boot and family.

    Indexed Settings

    CAS settings able to accept multiple values are typically documented with an index, such as cas.some.setting[0]=value. The index [0] is meant to be incremented by the adopter to allow for distinct multiple configuration blocks.

    Provisioning tasks can be carried out using an external Groovy script with the following structure:

    

    1
2
3
4

    		

    def run(Object[] args) {
    def (principal,userProfile,client,logger) = args
    ...
}

    It is not expected for the script to return a value. The following parameters are passed to the script:

    Parameter Description
    principal CAS authenticated Principal that contains all attributes and claims.
    userProfile The original UserProfile extracted from the external identity provider.
    client The Client configuration responsible for the exchange between CAS and the identity provider.
    logger The object responsible for issuing log messages such as logger.info(...).

    To prepare CAS to support and integrate with Apache Groovy, please review this guide.

  • The following settings and properties are available from the CAS configuration catalog:

    The configuration settings listed below are tagged as Required in the CAS configuration metadata. This flag indicates that the presence of the setting may be needed to activate or affect the behavior of the CAS feature and generally should be reviewed, possibly owned and adjusted. If the setting is assigned a default value, you do not need to strictly put the setting in your copy of the configuration, but should review it nonetheless to make sure it matches your deployment expectations.

  • cas.authn.pac4j.provisioning.rest.url=

    • The endpoint URL to contact and retrieve attributes.

    org.apereo.cas.configuration.model.support.pac4j.Pac4jDelegatedAuthenticationRestfulProvisioningProperties.

    How can I configure this property?

    The configuration settings listed below are tagged as Optional in the CAS configuration metadata. This flag indicates that the presence of the setting is not immediately necessary in the end-user CAS configuration, because a default value is assigned or the activation of the feature is not conditionally controlled by the setting value. In other words, you should only include this field in your configuration if you need to modify the default value or if you need to turn on the feature controlled by the setting.

  • cas.authn.pac4j.provisioning.rest.basic-auth-password=

    • If REST endpoint is protected via basic authentication, specify the password for authentication.

    org.apereo.cas.configuration.model.support.pac4j.Pac4jDelegatedAuthenticationRestfulProvisioningProperties.

    How can I configure this property?

  • cas.authn.pac4j.provisioning.rest.basic-auth-username=

    • If REST endpoint is protected via basic authentication, specify the username for authentication.

    org.apereo.cas.configuration.model.support.pac4j.Pac4jDelegatedAuthenticationRestfulProvisioningProperties.

    How can I configure this property?

  • cas.authn.pac4j.provisioning.rest.headers=

    • Headers, defined as a Map, to include in the request when making the REST call. Will overwrite any header that CAS is pre-defined to send and include in the request. Key in the map should be the header name and the value in the map should be the header value.

    org.apereo.cas.configuration.model.support.pac4j.Pac4jDelegatedAuthenticationRestfulProvisioningProperties.

    How can I configure this property?

  • cas.authn.pac4j.provisioning.rest.method=GET

    • HTTP method to use when contacting the rest endpoint. Examples include GET, POST, etc.

    org.apereo.cas.configuration.model.support.pac4j.Pac4jDelegatedAuthenticationRestfulProvisioningProperties.

    How can I configure this property?

    Configuration Metadata

    The collection of configuration properties listed in this section are automatically generated from the CAS source and components that contain the actual field definitions, types, descriptions, modules, etc. This metadata may not always be 100% accurate, or could be lacking details and sufficient explanations.

    Be Selective

    This section is meant as a guide only. Do NOT copy/paste the entire collection of settings into your CAS configuration; rather pick only the properties that you need. Do NOT enable settings unless you are certain of their purpose and do NOT copy settings into your configuration only to keep them as reference. All these ideas lead to upgrade headaches, maintenance nightmares and premature aging.

    YAGNI

    Note that for nearly ALL use cases, declaring and configuring properties listed here is sufficient. You should NOT have to explicitly massage a CAS XML/Java/etc configuration file to design an authentication handler, create attribute release policies, etc. CAS at runtime will auto-configure all required changes for you. If you are unsure about the meaning of a given CAS setting, do NOT turn it on without hesitation. Review the codebase or better yet, ask questions to clarify the intended behavior.

    Naming Convention

    Property names can be specified in very relaxed terms. For instance cas.someProperty, cas.some-property, cas.some_property are all valid names. While all forms are accepted by CAS, there are certain components (in CAS and other frameworks used) whose activation at runtime is conditional on a property value, where this property is required to have been specified in CAS configuration using kebab case. This is both true for properties that are owned by CAS as well as those that might be presented to the system via an external library or framework such as Spring Boot, etc.

    :information_source: Note

    When possible, properties should be stored in lower-case kebab format, such as cas.property-name=value. The only possible exception to this rule is when naming actuator endpoints; The name of the actuator endpoints (i.e. ssoSessions) MUST remain in camelCase mode.

    Settings and properties that are controlled by the CAS platform directly always begin with the prefix cas. All other settings are controlled and provided to CAS via other underlying frameworks and may have their own schemas and syntax. BE CAREFUL with the distinction. Unrecognized properties are rejected by CAS and/or frameworks upon which CAS depends. This means if you somehow misspell a property definition or fail to adhere to the dot-notation syntax and such, your setting is entirely refused by CAS and likely the feature it controls will never be activated in the way you intend.

    Validation

    Configuration properties are automatically validated on CAS startup to report issues with configuration binding, specially if defined CAS settings cannot be recognized or validated by the configuration schema. Additional validation processes are also handled via Configuration Metadata and property migrations applied automatically on startup by Spring Boot and family.

    Indexed Settings

    CAS settings able to accept multiple values are typically documented with an index, such as cas.some.setting[0]=value. The index [0] is meant to be incremented by the adopter to allow for distinct multiple configuration blocks.

    Provisioning tasks can be carried out using an external REST endpoint expected to receive the following:

    Header Description
    principalId CAS authenticated principal identifier.
    principalAttributes CAS authenticated principal attributes.
    profileId The identifier of the user profile extracted from the identity provider.
    profileTypedId The typed identifier of the user profile extracted from the identity provider.
    profileAttributes Collection of attributes extracted from the identity provider’s response.
    clientName The client name responsible for the exchange between CAS and the identity provider.

  • The following settings and properties are available from the CAS configuration catalog:

    The configuration settings listed below are tagged as Required in the CAS configuration metadata. This flag indicates that the presence of the setting may be needed to activate or affect the behavior of the CAS feature and generally should be reviewed, possibly owned and adjusted. If the setting is assigned a default value, you do not need to strictly put the setting in your copy of the configuration, but should review it nonetheless to make sure it matches your deployment expectations.

    The configuration settings listed below are tagged as Optional in the CAS configuration metadata. This flag indicates that the presence of the setting is not immediately necessary in the end-user CAS configuration, because a default value is assigned or the activation of the feature is not conditionally controlled by the setting value. In other words, you should only include this field in your configuration if you need to modify the default value or if you need to turn on the feature controlled by the setting.

  • cas.authn.pac4j.provisioning.scim.enabled=false

    • Whether provisioning to SCIM targets should be enabled for delegated authentication attempts.

    org.apereo.cas.configuration.model.support.pac4j.Pac4jDelegatedAuthenticationScimProvisioningProperties.

    How can I configure this property?

    Configuration Metadata

    The collection of configuration properties listed in this section are automatically generated from the CAS source and components that contain the actual field definitions, types, descriptions, modules, etc. This metadata may not always be 100% accurate, or could be lacking details and sufficient explanations.

    Be Selective

    This section is meant as a guide only. Do NOT copy/paste the entire collection of settings into your CAS configuration; rather pick only the properties that you need. Do NOT enable settings unless you are certain of their purpose and do NOT copy settings into your configuration only to keep them as reference. All these ideas lead to upgrade headaches, maintenance nightmares and premature aging.

    YAGNI

    Note that for nearly ALL use cases, declaring and configuring properties listed here is sufficient. You should NOT have to explicitly massage a CAS XML/Java/etc configuration file to design an authentication handler, create attribute release policies, etc. CAS at runtime will auto-configure all required changes for you. If you are unsure about the meaning of a given CAS setting, do NOT turn it on without hesitation. Review the codebase or better yet, ask questions to clarify the intended behavior.

    Naming Convention

    Property names can be specified in very relaxed terms. For instance cas.someProperty, cas.some-property, cas.some_property are all valid names. While all forms are accepted by CAS, there are certain components (in CAS and other frameworks used) whose activation at runtime is conditional on a property value, where this property is required to have been specified in CAS configuration using kebab case. This is both true for properties that are owned by CAS as well as those that might be presented to the system via an external library or framework such as Spring Boot, etc.

    :information_source: Note

    When possible, properties should be stored in lower-case kebab format, such as cas.property-name=value. The only possible exception to this rule is when naming actuator endpoints; The name of the actuator endpoints (i.e. ssoSessions) MUST remain in camelCase mode.

    Settings and properties that are controlled by the CAS platform directly always begin with the prefix cas. All other settings are controlled and provided to CAS via other underlying frameworks and may have their own schemas and syntax. BE CAREFUL with the distinction. Unrecognized properties are rejected by CAS and/or frameworks upon which CAS depends. This means if you somehow misspell a property definition or fail to adhere to the dot-notation syntax and such, your setting is entirely refused by CAS and likely the feature it controls will never be activated in the way you intend.

    Validation

    Configuration properties are automatically validated on CAS startup to report issues with configuration binding, specially if defined CAS settings cannot be recognized or validated by the configuration schema. Additional validation processes are also handled via Configuration Metadata and property migrations applied automatically on startup by Spring Boot and family.

    Indexed Settings

    CAS settings able to accept multiple values are typically documented with an index, such as cas.some.setting[0]=value. The index [0] is meant to be incremented by the adopter to allow for distinct multiple configuration blocks.

    Provisioning tasks can be carried out using the CAS SCIM Provisioning. Once enabled and configured, authenticated profiles established from the external identity provider may be provisioned via SCIM to other systems.

    :information_source: Usage

    SCIM integration support for delegated authentication is only handled via SCIM v2.

  • If you wish to create your own provisioner for delegated authentication, you will need to design a component and register it with CAS as such:

    

    1
2
3
4

    		

    @Bean
public DelegatedClientUserProfileProvisioner clientUserProfileProvisioner() {
    return new CustomDelegatedClientUserProfileProvisioner();
}

    See this guide to learn more about how to register configurations into the CAS runtime.